1. Twin Rotor logo on the cab door
2. Cromax CR logo on the graintank
3. New Holland leaf decal with 3D effect
4. Black eye decal on the main side shields
5. Model number
6. New Holland blue swoosh
7. Black surface decal on Graintank

CR7.90 & CR9.90

Equipped as standard with a sensor on the stone trap notifying the operator if the door is still open.

 

More comfort and safety at work.

With the sensor, the feeder cannot be engaged whenever the stone trap is open.

CR7.90

Dynamic Flow Control™ introduced on 17’’.

Position angle of vanes has a big effect on the power efficiency of the crop flow in small grains and soybeans.

 

The rotor vanes position can be adjusted infinitely from slowest to fastest from the cab and on the go during harvest.

 

IntelliView™ display will show a percentage from 0% (slowest) to 100% (fastest) in steps of 5%.

 

Rotor performances variation between the slowest and the fastest vane position can be as much as 20% difference in all crops.

CR7.90 & CR9.90

New features include:

 

New style seat cushions for increased comfort and updated looks

 

• 2 stage heating and ventilation (+40% increased ventilation)
• Side contour pneumatic support
• New colors and fabrics all seats
• Matching instructor seats

CR7.90 & CR9.90

• Digital Audio Broadcasting (DAB) is a digital radio standard for broadcasting digital audio radio.
• Bluetooth DAB+ Radio

CR7.90 & CR9.90

New option is available which allows the customer to fold and unfold the right-hand side mirror from the cab using the switch located in the headliner.

CR9.90

More visibility as standard on CR 22″!

CR7.90 & CR9.90

IntelliSense™ fitted as standard

 

• Premium Automation as standard
• More comfort
• Optimized productivity along the harvesting season

Updates:

• New crops: Milo and oats
• Now 8 crops controlled by
  Outstanding versatility
• New feederate based on engine load
• Fixed Throughput strategy has been removed

CR7.90 & CR9.90

1. Grain quality sensor (Crop Analysis) offered from Plant 

• Full integration in IntelliView™ IV mapping
• 7 parameters, 3 crops
• 3- or 5-years subscription for cloud location specific calibration curves updates (through Dinamica Generalenetwork)
• NutriSense™ sensor available as field installed kit

2. Kali module (modem) and antenna installed from plant.

CR7.90 & CR9.90

To improve user experience on high spec units, configured with both IntelliSteer™ guidance (link to Antenna) and IntelliSense™.

 

The second display (top screeen) can be oriented and focused on Precision Farming: IntelliSteer™ & autoguidance.

• Better operator experience
• More ergonomic
• Great opportunity to share data in terms of computer performance as well as operator comfort.

The first screen on the armrest can focus on machine information, settings and IntelliSense™.

CR7.90 & CR9.90

For increased strength and durability, new wheel fixations for combines on planetary final drives have been introduced.

M22 bolts with threaded holes in the hub replace the press fit studs and wheel nuts.

CR7.90

New CR7.90 serves as an entry track model for the CR range.

• HD belt now available in 28.5-inch width
• Released on Flex and Terraglide technology
• The heavy-duty track is for high roading applications, travelling between different areas with:
• Longer lasting carcass
• Optimised drive lugs
• High-roading rubber compound
• 4-Ply Carcas

CR7.90 & CR9.90

1. Additional air pressure outputs at cab area
   – CR equipped with air pressure kit have additional air pressure outputs at cab entrance and at right-hand operator platform.
   – Two more remain present on the engine bay and left-hand rear side.

    

2. New hose and air gun
   – New air gun with longer air nozzle (air nozzle of 620mm)
   – New 7,6m (25ft) curled air hose + air gun (FF) for engine compressor is now installed on the left-hand tailings auger.

CR9.90

New chopper drive coupler for easier engagement

 

• Chopper clutch engagement and drive support. Improved and hardened splines with bigger chamfers offer better engagement or disengagement operation (less friction).
• The chopper clutch support has been redesigned to offer longer bearing lifespan and improved structural integrity.

CR7.90 & CR9.90

A new chopper speed combination to offer more chopping optimisation in small grain applications. The new option combines 2750 rpm and 4000 rpm speeds in a single pulley

 

• 2750 rpm offers more efficient chopping when with less knife wear and reduced power consumption.
• 4000 rpm provides finer chop quality and is recommended in hard chop conditions. 

 Opposite (in the table) are the different chopper speeds according to the configuration.

CR9.90

Cursor 13

To further reduce engine bay temperatures, the turbo has been fully boxed offering reduced surface temperatures.

 

This has been achieved by introducing a new turbo on the C13 engine with a water-cooled bearing housing.

 

With this introduction, a blowoff kit is no longer required.

Easy to use

• Familiar user interface based on Android
• Quick learning curve
• Easy to locate functions
• Customisable run screens
• Tablet like gestures (zoom in, zoom out, rotate…)

CR7.90 & CR9.90

Telematics becomes lifetime in base

• In the past, customers had to pay a yearly subscription fee to get baseline connectivity information from their PCM modems in the machine to the New Holland portal.
• Users will now be able to transfer data, utilise remote support, process agronomic data and connect to the New Holland portal with no recurring cost to them.

Connectivity included comes standard on all flagship combines ensuring they support the latest connectivity features:

• New Holland portal Machine & Agronomic Data visualisation
• Remote Display View
• Firmware Over The Air (FOTA)
• Remote Service Tool (RST)

CR7.90 &CR9.90

In cab visualisation of the grain sample as viewed by the GrainCam

 

• MOG and broken grain overlays
• Standard feature on all CR combines with IntelliSense™
• Configurable in every run screen
• Refresh rate every 5 seconds
• Ability to program Auto pop-up (every 5 /10 / 20 minutes).
• By default, this popup feature is switched off.

CR7.90 & CR9.90

A pro-active system which predicts the slope of the harvesting pass based on previous passes (coverage map)

• When an uphill is predicted, IntelliSense™ will pro-actively open the sieves
• To avoid grain losses due to a late response of the system which can dump material out of the combine.

When a downhill is predicted, IntelliSense™ will pro-actively close the sieves.

• To improve grain sample quality